Rebel LUT0039, Руководство пользователя

Страница: 4 / 9

6 7 EN EN
Nominated power 50 W
Soldering tip temperature 160 - 500ºC
Station voltage
230 V AC; 50 Hz
Dimensions 135 x 85 x 70 mm
Weight 600 g
In set
Stand, soldering iron, users
manual
SPECIFICATION
LEARN MORE
For more information on this device visit: www.rebelelectro.com.
Read owner’s manual carefully before using your device.
Visit www.rebelelectro.com website for more products and accessories.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
PRODUCT DESCRIPTION
• temperature control knob
• POWER LED indicating that the soldering tip is heating up
OPERATION
1. Place the soldering station on stable, flat ground
2. The stand should be inserted into the dedicated hole on the station.
3. Plug the soldering station into a power outlet and switch it on using the
temperature control knob
4. Before the first use, tin the soldering tip. To do this, turn on the soldering iron,
melt a small amount of tin and stick it to the tip.
Note:
It is not recommended to use the soldering iron for a long time with the maximum
temperature of the soldering tip.
5. Use temperature control knob to set temperature.
6. After finishing work, turn off the station with temperature control knob and wait
for the soldering iron to cool down.
Note:
After finishing work, it is recommended to leave a small amount of tin on the
soldering tip - it serves as a protection for the tip until the next use.
CLEANING AND MAINTENANCE
• Before cleaning the device, make sure that the device is unplugged from power
mains.
• Clean this device with soft, slightly damp cloth. Do not use solvents or other
cleaning agents.
• If the tin is poorly adhered to the soldering tip, clean it with fine sandpaper and
then reapply a thin layer of tin over it.
OFF
POWER
MAX