Rebel TOOLS MIE-RB-0003, Руководство пользователя

Страница: 7 / 16

EN
7
3. Put the meter against the wall surface and press the
calibration button.
4. After calibrating, the meter will beep twice. Move the
meter slowly along the wall, while pressing the meter to
the wall.
5. If metal, wood or live wire is detected, the detection
sensitivity indicator will fill up, and the meter will beep
continuously.
6. Detected element can be marked using the case notch.
Note:
• Calibration has to be conducted on an empty wall.
• The meter detects live wires with voltage higher than 110
V.
• The meter does not detect such wires as: shielded,
telephone, TV or non-powered.
• In order to maintain accuracy, hold the meter by its lower
part.
• While using the meter on rough surfaces, place a thin
piece of cardboard under the meter. Make sure that the
calibration process is conducted with a piece of
cardboard under the meter.
SPECIFICATION
Main features
• Detection sensitivity indicator
• Low battery level indicator
• Display dimensions: 51 x 25 mm
• Dimensions: 155 x 54 x 27 mm
• Weight: 157 g
• Working temperature: -7°C ~ 40° at humidity <75%
• Storing temperature: -20°C ~ 50° at humidity <85%
• Power: 9 V battery
Measurement range
• Detection of metal in walls up to 30 mm deep
• Detection of wooden studs (max. dimensions 30 x 30 mm)
in walls up to 18 mm deep
• Detection of wires with 90-250 V AC