GENERAL SAFTEY PRECAUTIONS
Application: Use DBR-32WH on concrete re-enforc-
ing bars only.
RESTRICT USE TO DESIGNATE MATERIALS
There is always a chance that the end of material may
break and shoot out, especially if the material is harder
than those specified. Exceeding designated material
specifications greatly increase this risk and will also
damage the tool. Do not attempt to use the tool for
rebar harder, thicker, or thinner than those specified.
USE EYE PROTECTION
Wear safety goggles, safety glasses with side shields
or a face shield when using the rebar straightener.
KEEP HANDS AWAY
Do not touch rebar, housing, hook, rollers, and/or the
piston while rebar straightener is being operated.
GUARD AGAINST ELECTRIC SHOCK
To avoid possible electric shock, do not handle the
DBR-25WH with wet hands, or use in the rain or other
damp places. Be aware of all power lines, electric
circuit and other hazards that may be contacted, es-
pecially those that are below the surface or otherwise
hidden from view.
UNPLUG TOOL
Disconnect the tool from outlet when not in use
and before cleaning, adjusting, or servicing. Do not
disconnect plug from outlet by pulling on the cord.
Always check that the switch lock is OFF before plug-
ging your tool in.
BEWARE OF YOUR ENVIRONMENT
Do not use rebar straightener in the presence of flam
-
mable materials (e.g., paint, thinner, petroleum prod-
ucts, and adhesives.) Do not use rebar straightener in
a possibly explosive environment, (e.g., fumes, gas, or
dust) or in areas that are poorly ventilated.
KEEP WORK AREA TIDY AND WELL LIT
Make sure that work area is properly lighted and clear
of obstructions. Operator should at all times have an
unobstructed view of their rebar straightener, rebar,
and the surrounding area.
WEAR PROPER APPAREL
Do not wear loose clothes, dangling objects, or jew-
elry. Restrain long hair. The use of a safety helmet
and rubber soled boots are strongly recommended.
If safety gloves are worn, be especially careful that
gloves do not get caught in the moving parts.
KEEP VISITORS AWAY
Keep all visitors at a safe distance from the work area
for their own protection and to prevent distraction of
the operator.
Max Rebar Diameter
25 mm
Straightening
Max yield point 345N/mm2
Bending
Max yield point 295N/mm2
Rebar Diameter
Straightening Capacity
Bending Capacity
Push
Pull
Push
Pull
13 mm
up to 125° up to 121°
up to 94° up to 92°
16 mm
128
124
90
90
20 mm
130
126
90
90
25 mm
132
124
90
90
Max pressure
11 Tons
8.5 tons
11 tons
8.5 tons
Output
1.5 HP
Weight
22.5 Kg
Dimension
660x270x200mm (LxWxH)
