Rear view safety RVS-770612, Руководство по эксплуатации продукта

Страница: 6 / 21

BEFORE YOU BEGIN INTALLATION:
Before Drilling please check that no cable or wiring is on other side of
wall. Please clamp all wires securely to reduce the possibility of them
being damaged while vehicle is in use. Keep all cables away from hot or
moving parts and electrical noisy components.
We recommend doing a Benchmark test before installations to insure
that all components are working properly.
6
Step 1
Step 2
Tep 3
Step 4
Step 5
Choose the monitor and camera locations.
Install all cables in vehicle, when necessary a ¾”
(19mm) hole should be drilled for passing camera
cable through vehicles walls. Install split grommets
where applicable.
Once all cable/ and wiring have been properly placed
and routed, perform a system function test by
temporarily connecting the system. If the system
seems to not be operating properly see
troubleshooting.
Backup camera used for monitoring while backing up
must be connected to port # labeled “Backup” and blue
trigger wire must be connected to reverse gear fuse
circuit.
To automatically turn camera ON while shifting
reverse, connect blue wire to reverse gear light/fuse
and plug camera into port # labeled “Backup”.