Rear view safety RVS-770612, Руководство по эксплуатации продукта

Страница: 5 / 21

5
WARNING
n
Make sure the monitor stand is
firmly fixed to secure location.
n
Make a hole on vehicle body if
necessary, of 3/4” for the
camera extension cable
connector to pass through
during installation.
n
The monitor should be situated
away from direct sun light, heat,
water or moisture. (This product
is made with precise electronic
components that should be
handled with care. Do not let it
fail because of improper use.
n
The rear view system is intented to
be used when the vehicle is in
reverse. Please do not watch movies
or operate the monitor while driving.
It may result in accident because of
distraction.
n
Do not install the monitor where it
may obstruct drivers view or obstruct
an air bag device.
n
Do not attempt to service this product
on your own. If the system has any
problem, please disconnect power to
the unit and contact customer
service.
n
Dropping the unit may cause possible
mechanical failure.
n
Please take special care to the
wire positioning while installing
the rear view system in order to
avoid wiring damage.
Information
IN NO EVENT SHALL SELLER
OR MANUFACTURER BE
LIABLE FOR ANY DIRECT OR
CONSEQUENTIAL DAMAGES
OF ANY NATURE, OR LOSSES
OR EXPENSES RESULTING
FROM ANY DEFECTIVE
PRODUCT OR THE USE OF
ANY PRODUCT.
SAFETY PRECAUTIONS
Customer Service
rear View Safety Inc.
1680 Atlantic Ave # 301
Brooklyn NY 11213
Tel: 800-764-1028
www.rearviewsafety.com
If you have any questions about
this product contact
,
, :