Reverse With Confidence
™
7
Before drilling please check that no cable or wiring is on the other side
of the wall. Please clamp all wires securely to reduce the possibility
of them being damaged while vehicle is in use. Keep all cables away
from hot/moving parts and electrical noisy components.
We recommend doing a benchmark test before installation
to insure that all components are working properly.
Step 1: Choose the monitor and camera locations.
Step 2: Install all cables in vehicle, when necessary a 0.8 (20mm)
hole should be drilled for passing camera cable through vehicles
walls. Install split grommets where applicable.
Step 3: Once all cables and wiring have been properly routed, perform
a system function test by temporarily connecting the system.
BEF
ORE Y
OU B
EGIN
MENU
MIR/NOR
PAIR
1
2
3
PUT IN
TWIST &
TIGHTEN
WATERPROOF
WATERPROOF CONNECTION
HARDWIRE
OR CIGARETTE LIGHTER PLUG
FEMALE TO MALE
MONITOR
CAMERA
MALE TO FEMALE
LOOSE
POWER
CABLE
LOOSE
POWER
CABLE
FEMALE PLUG
MALE PLUG
RVS-355W.indd 7
10/2/2017 3:33:33 PM
