VREngine/SMD Series Users Manual
RealVision Inc.
9
3.2. DIP-switch
settings
The VREngine/SMD’s VGA output format is controlled by DIP-switches located on the
corner of the board as shown in Fig. 1.
Fig. 1
Front side of a VREngine/SMD
Unless advised otherwise by your monitor vendor, confirm that the DIP-switches are
initially set as in
Fig. 2
. With these settings, the VGA signal is automatically
determined using the EDID data read from the monitor during initialization.
Fig. 2
VGA output setting for an EDID compatible monitor.
3.3. Inserting the board
1. Ensure that your computer and any peripheral devices connected to it are
completely turned off.
N.B.
The internal parts of your computer are still very hot just after being turned off.
Wait until everything cools off before starting the installation.
2. Follow the instructions in your computer’s user manual to remove its cover.
