Carefully remove one foot at a time from the foot straps. Slowly turn around never taking both feet off of the foot
platform, you
MUST
always have weight pressed on the foot platform .
Climbing Instructions
When you have reached the desired height to hunt from, secure
Safety Lock Cinch Straps
so they are tight in a sitting position.
The pressure created on Seat Platform from securing
Safety Lock
Cinch Straps
will prevent Foot Platform and Seat Platform from
slipping down should you decide to stand and take pressure off Seat
Platform.
1
-Check that your harness is secure, check that cables are properly quick clipped, and make sure that the seat straps on
your seat section are off to the side, they should not obstruct the cable connecting to the tree in anyway while climbing.
-Practice at ground level with your Full Body Harness.
-Familiarize yourself with this product’s function so you feel comfortable with the climbing procedure.
Before beginning to climb
4
Once the
Safety Lock Cinch Straps
are secure, wrap the
Platform Ratchet Strap around the tree. Insert the Platform
Ratchet Strap hooks into the holes on each side of the Foot
Platform Assembly and tighten. (See Detailed Ratchet
Strap Instructions).
Next wrap the Tree Buckle Strap around the tree. Insert the loose
end of the Tree Buckle Strap through the back of the Seat Platform
Assembly (see 5A).
Feed Tree Buckle Webbing though the
spring loaded cam buckle and firmly tighten around tree.
5
8
9
7
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
Model: RTCS-421
Deluxe Aluminum Climbing Stand
Customer Service Department 1-866-972-6168
www.primalvantage.com/realtree
1
Safety Lock Cinch Straps
4
6
2
3
Before turning around, attach the top back of Seat Pad around tree trunk using webbing straps and
speed buckle. First completely loosen the webbing straps, wrap both ends around tree trunk, fasten
speed buckle and tighten.
FIG. 5
6
C
B
K
A
L
C
M
M
M
M
M
©2021 (rev. 1/21)
NOTE:
Follow these steps in reverse to remove your ladder stand from tree.
Lean against shooting rest and
lift your feet to raise foot platform.
Push down to set foot platform in
raised position.
FIG.1
2
Stand and lift up on seat platform
to adjust it to a comfortable level.
Push down to set seat platform in
raised position. Raise your harness
tether to take up the slack.
FIG. 2
3
Again, lean against shooting rest
and lift you feet to raise foot
platform. Push down to set foot
platform in raised position.
FIG.3
To continue climbing up tree,
repeat steps 1 through 3, while
continuously adjusting your
harness to keep strap above
your head with minimum slack.
To climb back down the tree, reverse the process, always ensuring you are constantly adjusting your harness
tether as you move.
Sit on the seat Pad, if any adjustment needs to be made to the seat placement, you
MUST
climb back to the
ground and adjust on the ground. Using a safe hoist/lift system, raise your unloaded weapon.
5
5A
L
K
