Really Right Stuff MC-14, Руководство пользователя

Страница: 9 / 16

9
9
www.ReallyRightStuff.com
ADJUST THE SET SCREW
1. Swing leg closest to
Set Screw
inward slightly.
2. Pull
Angle Stop
out until
it stops, then swing leg
completely out.
3. Insert 2.5mm hex key into
Set
Screw
, then turn clockwise to
tighten it against the bottom of
your tripod head.
The TFC‑14 platform comes with one Set Screw that can be used to prevent
your tripod head from coming loose. For clarity, drawings do not show the
tripod head installed to the tripod. Install your tripod head, then follow steps.
1
2
Set
Screw
Note that if you tighten the Set
Screw it will almost certainly
mar the bottom of your tripod
head. To semi-permanently
install your tripod head and
avoid any blemish marks use
one drop of threadlocker fluid
on the Stud (included with
your tripod) when you install
your head.
3