7
Optional Function Setting
This Wired scanner is plug and play.
1. Restore Factory Setting
** Scan following setup code, the scanner will will return to factory condition.
Restore default
2. Scanning Mode Setting
2.1. Manual Trigger mode (default):
Pressing the trigger, the red laser light will shows up and reads the barcode. When
release the trigger , the red laser light will does off.
** Scan the following code to set the scanner to Manual trigger mode.
Manual trigger mode
2.2. Continuous Scanning Mode
There is no need to press the trigger in this mode. When read a barcode successfully,
the laser light will disappear a second and then the laser light will comes up again , and
ready to read another barcode.
** Scan the following code to set the scanner to Continuous Scanning Mode.
Continuous Scanning mode
