ASSEMBLY INSTRUCTIONS
Install the AAA battery as shown in the diagram below.
1 .
7
+
-
Open the door to place the LP propane tank (a).
Place LP propane tank on the metal tank holder inside the fire table body ( b).
a
b
2 .
3. Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the
collar of the LP gas tank, the regulator valve, the burner
tube, or the burner ports.
Connect the gas line to the tank by turning the connection
knob clockwise. Hand-tighten only.
Disconnect the LP Gas Tank
To disconnect the LP gas tank, make sure the valve on the
LP gas tank is completely closed.
Disconnect the connection knob by turning it counterclockwise
until it is detached from the valve.
Once the LP propane tank is properly connected to the
LP regulator hose, replace the door.
