3
2 - Connect the ethernet cable
NOTE: This is a revised description which is relevant only for XL5 displays from serial number
SC2302-0001 (early 2023) and later. For earlier models, please refer to the original XL5 user
manual v. 1.0
Pull the cable out.
Insert the cable in the slot on the right side of
the touchscreen.
Start by placing the XL5 on a flat surface, but
with the front of the display accesible from
underneath.
You should be able to access these holes on
the front of the bottom side of the display.
Through one of these two holes you should
find an ethernet cable.
3 - Connect the powersupply
Connect the cable from the power supply to the
right side of the touchscreen.
Connect the powersupply to a power outlet.
