Page 4
Packaging and Parts
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
Packaging and Parts
The Fremont Opener will ship out in multiple
packages. Weight and size will vary depending on
order.
The main package is for your base kit:
•
Shipping Dimensions are 44.5”x 7.5” x 5”
•
Weight is approximately 30lbs
The kit includes the following parts:
• Control Unit (1)
• Main track pre-assembled with limit stop chain
and motor carriage (2)
• Isolator (pre-assembled on chain) (2.1)
• Connecting sleeve x2 (3)
•
Additional track pieces (4)
• Chain tensioner (for closing end of track) (5)
• Wire Connector (open end of track) (5.1)
•
Ceiling bracket which is 2 parts (6)
•
Ceiling bracket hardware (7)
•
2 bolts M8 x 20 (wrench size ½”) with two self-
locking nuts M8 (8)
•
Door Arm (9)
Note:
not needed for Fremont
application
•
Curved door arm (10)
Note:
not needed for
Fremont application
• Header bracket with pin and 2 locking c-clips
(11)
•
2 screws 8 x 60mm (wrench size ½”) and 2
washers 5/16” for the attachment to header
(12)
• 2 pins with locking c-clip for door arms Note:
not needed (13)
•
Emergency release handle (14)
• Door bracket
Note:
not needed (15)
•
Self-drilling screws ¼” (wrench size 3/8”) for the
door bracket Note: not needed (16)
• Transmitter or remote which is preprogrammed
to your opener (17)
