Real Flame Vivente VVT100, Инструкция по установке и эксплуатации

Страница: 22 / 25

22
Smart Phone App
“Flame Connect” allows you to control your fire's function over Bluetooth, from your hand.
Search for “Flame Connect” on your App Store and install to get started.
Fault Codes
On Board Display Description
Action
CD20
Room Sensor (NTC) Error Contact your retailer and reference this error
code.
CD03
The internal NTC is measuring elevated tempera-
tures within the product. Unplug Unit at power supply to reset, allow it
to cool down, then plug unit back in to restart.
CD04
Internal Communication Error Contact your retailer and reference this error
code.
CD05
The internal temperature sensor has failed. Unplug Unit at power supply to reset, allow it
to cool down, then plug unit back in to restart.
CD53
This error displays when timer settings are out of
sync. This occurs when the product has power cut
off for over 40hours. The product can no longer
operate at the determined time settings, and CD53
is displayed. Reset the timer settings using the Flame Con-
nect APP.
Function On Board Controls Remote Control App Control
Standby
Temperature Adjustment (15
- 32C)
Heat Disable - -
Heater Mode (ECO, Boost,
Frost Protection, Fan)
- -
Flame Intensity
Volume Setting
Run-back Timer
7 - Day Timer - -
Volume Setting
Ambient Light Setting
Ambient Light On/Off -
Customizable Ambient - -
SmartSense
Product Features Overview