Real Flame EXURO IO1000, Инструкция по установке и эксплуатации

Страница: 20 / 28

20
INSTALLATION
(continued)
Assembly of the Glass Feature
The glass has been packaged seperately to protect it during transit, and can be found inside the
firebox. Carefully insert the glass into the cartridge as shown, between the two metal flanges and
push it all the way to the bottom. Handle the glass with care and avoid scratching it.
Fitting the Fascia
Before fitting the fascia, four hooks must be bent out from the fascia so that they will engage with
the cutouts in the fire. Use your fingers to fold one hook out from each corner so that it sits at 90
degrees to the rear of the fascia. Attach the switch cable from the rear of the fascia to the cable in
the fire and then carefully hang the fascia.
Line up the hooks with the receptacles on the IO1000, and gently push the fascia into position.
The switch should be on the right hand side of the fire. The angle of the hooks can be adjusted if
necessary to ensure a good fit.