Technical support: www.real-el.com
3
Z-4010 BT
ENG
User’s Manual
Interfacing
Attention! Make sure the audio source to which the earphones will be
connected supports Bluetooth technology. Some PC operation sys-
tems or laptops may require drivers or software (not included) for
interfacing with earphones on Bluetooth technology. For more
detailed information on connectivity features, refer to the manual of
the operating system. Earphones do not require any drivers.
•
To transmit a signal via Bluetooth it is necessary to connect the device
with a signal source (see connection diagram in Fig. 2). For this purpose
turn on the earphones and not releasing button
b
wait for the search mode
to be activated – LED indicator
d
indicates blue and red alternate.
•
Select the search mode on a signal source (telephone, notebook, smart-
phone, etc.). “Z-4010 BT” will be displayed on the devicelist, need to
choose it and make connection*.
•
When connection is successful, there will be vocal signal. If no device
connected, the earphones will be turned o
ff
automatically in 10 minutes. To
interface devices, the earphones should be turned on again to the search
mode**.
•
LED indicator
d
on the earphones blinks blue during the data exchange
with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via
Bluetooth.
** If the item has been already registered in the device list of a source, then the
second search mode activation is not needed. Choose only the item name and the
“connect” command on the source.
