Technical support: www.real-el.com
2
Wireless Stereo Earphones
ENG
Z-4010 BT
b
a
c
d
e
f
CONTROL PANEL DESCRIPTION
a
: micro USB port for charging
b
: earphones ON/OFF button;
phone call acceptance;
Playback / Pause;
call control button
c
Microphone (from the back)
d
LED indicator
e
– : volume level decrease button;
previous track
f
+ : volume level increase button;
next track
CONNECTION AND OPERATION
Attention! Built-in battery must be
charged completely prior to the earphones operation. Make sure that
earphones are turned off before battery charging. Do not try to
extract or replace the battery on the earphones, this may cancel the
warranty or break the device.
Battery charging
•
Connect the earphones connecter
a
to a USB port of PC or USB charger
using USB to micro USB cable (included). During battery charging indicator
d
is red.
•
When the device is charged in full, indicator
d
is turned o
ff
.
•
In case of battery charge level is low repeats signal appers and LED indi-
cator
d
blinks red.
Earphones switching on/off
•
To switch on the earphones press and hold button
b
. During switching on
indicator
d
blinks blue color and sounds voice signal. To switch o
ff
the
device press and hold button
b
. LED
d
indicates red and sounds voice
signal.
Fig. 1. Control panel design