Real Carriage Door & Sliding Hardware Fremont Opener, Руководство по установке

Страница: 14 / 38

120 Volt Outlet
FREMONT PARTS ORIENTATION
• In order to install the Fremont you will need to install the swing arm
attachment to the motor carriage, which is pointing in the direction of
your doors
• The red limit stop and wire connector must be located on the door
side of the rail.
• The Control unit housing can be mounted anywhere that is convenient
with the wire connector running to it to power the motor carriage.
CONNECTING THE RAILS
1-a.
Take your rails and parts boxes out and set aside. Slide the bridges
(part3) onto each end of Part 2 (track with motor carriage).
I N S T A L L A T I O N
The control unit housing may be mounted anywhere convenient for
your application.
12 INS
T
ALLA
TION