9
The pressure can for the multi nozzle be
adjusted by tuning it. WARNING: Do not
do this under operation to avoid that the
hand hits the jet.
Unscrew the container (A) from the foam
sprayer
Add detergent to the container (A) and
screw the container to the foam sprayer
Adjust the amount of detergent with the
button (B)
Pay special attention:
1. You can adjust the foam spray with
botton B, if you want spray water only, you
can turn botton B to close the foam spray.
2. Foam equipped quick connector. Press C,
then insert into the gun. Caution: When
attaching the soap bottle the button (C)
should come out again. Check before
activating the trigger that the nozzle is
properly fixed.
3. Add detergent as following:
The trigger gun and lance can be stored
during and after operation in the parking
holder Click the trigger gun into the parking
holder
The machine should be stored in a frost-free
room!
Pump, hose and accessories should always
be emptied of water prior to storing as
follows:
Stop the machine (press the start/stop
switch
“
O
”
and detach water hose, high
pressure hose and nozzle
3.6 Multi Nozzle
3.7 Foam Sprayer
4. After use instructions
B
A
3.8 Parking holder
C
