12
Storage
1.
Storage the trigger gun and spray
lance on the holders(Fig.17).
2.
Hang the power cord on (7) and
high pressure hose on (10).
3.
Storage the nozzles onto the (19).
CAUTION!
Always store your pressure
washer in a location where the temperature
will not fall below 32ºF (0ºC). The pump in this
machine is susceptible to permanent damage
if it freezes.
FREEZE DAMAGE IS NOT
COVERED BY THE WARRANTY.
• Store the pressure washer indoors in a dry,
covered area where it is not subject to
adverse weather conditions.
• It is important to store this product in a
frost-free area.
• Always empty water from all hoses, the
pump, and the detergent bottle before
storing.
Winterizing and long-term
storage
• If you must store your pressure washer in a
location where the temperature falls below
32ºF (0ºC), you can minimize the chance of
damage to your machine by utilizing the
following procedure:
• Disconnect all water connections.
• Turn on the machine for a few seconds until
the remaining water in the pump exits. Turn
off immediately.
• Do not allow the high-pressure hose to
become kinked.
• Store the machine and accessories in a
room that does not reach freezing
temperatures.
• Do not store near a furnace or other
sources of heat that may dry out the pump
seals.
• Operate the pressure washer with non-
corrosive/non-toxic anti-freeze, a pump
saver, or a pump protector before storing
for the winter.
WARNING!
Before reusing, completely flush
the unit out with clear water. Anti-freeze
products can damage paintwork, so you
must ensure there is no anti-freeze left in the
system before using it again.
Fig.17
Fig.18
