10
6.
When you have finished using the
detergent injection system, insert the bottle
detergent with fresh water. Siphon water at
low-pressure for one minute to rinse the
bottle until it is thoroughly cleaned.
CAUTION!
Failure to follow these cleaning
instructions will cause the injection system to
become clogged and inoperable.
Working with Patio
Cleaner and
Brush(optional)
The patio cleaner and brush is a powerful
accessory for cleaning patio, driveways, car,
etc.
A quick-connect adaptor is required when
working with patio cleaner and brush.
To connect a patio cleaner to the spray lance:
1.
Turn off the pressure washer and shut off
the water supply. Pull the trigger to release
water pressure.
2.
Engage the safety lock on the trigger
handle by pushing right on the safety
lock(Fig.11).
3.
Remove the nozzle from the spray lance.
4.
Snap the quick-connect adaptor into the
spray lance tight, then connect the patio
cleaner or brush to the another end of
adaptor tight. (Fig.15)
To disconnect the patio cleaner or brush
from the spray lance once the cleaning job is
complete:
5.
Turn off the pressure washer and shut off
the water supply.Pull the trigger to release
water pressure.
6.
Engage the safety lock on the trigger
handle by pushing right on the safety
lock(Fig.11).
7.
Remove the patio cleaner or brush from
the spray lance.
NOTE:
Do not use the patio cleaner and
brush as a broom but let it surf smoothly over
the surface.
Rinsing with the pressure
washer
1.
Turn off the pressure washer and shut off
the water supply.
2.
Pull the trigger to release water pressure.
3.
Engage the safety lock on the trigger
handle by pushing right on the safety
lock(Fig.11)
4.
Remove the nozzle from the spray
lance and storage them on the washer unit
(19).
5.
Select the right nozzle for the job (Fig. 16).
Patio Cleaner
Quick-Connect
Adaptor
High Pressure Gun
Brush
Fig.15
