www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-2300 / 2301 / 2302 / 2303
3
7-20-16 MMC
BILL OF MATERIALS
Safety Warning
Before you start installation:
ReadyLIFT® Suspension highly recommends that the installation of this product be performed by a professional mechanic with
experience working on and installing suspension products. Professional knowledge and skill will typically yield the best installation
results. If you need an installer in your area, please contact ReadyLIFT® Suspension customer service to find one of our “Pro-
Grade” Dealers.
Notes:
Installation by a professional mechanic is highly recommended.
A Factory Service Manual for your specific Year / Make / Model is highly recommended for reference during installa-
tion.
All lifted vehicles may require additional driveline modifications and or balancing.
A four wheel vehicle alignment will need to be performed after installation of this product.
Speedometer / Computer recalibration is required if ch/- 10% from factory tire diameter.
Use of a Vehicle Hoist will greatly reduce installation time.
Vehicle must be in excellent operating condition. Repair or replace any and all worn or damaged components prior to
installation.
Description QTY
Upper Control Arms
2
Upper Control Arm Bushings
8
Grease Pack
1
Crush Sleeve
4
Ball Joint Boot Spacer
2
Heavy Washer
2
Strut Extension
2
Pre-load Spacer
2
Rear Block
2
U-Bolt and Hardware Pack
1
Carrier Bearing Spacer
1
***Carrier Bearing Spacer only included with kits for 2 piece drive lines.***
*** 2WD models will ignore all steps involving axle shafts.***