background image

www.ReadyLIFT.com  -  Phone: (877) 759-9991 

   

69-2070-IM-AA 

 

 

 
 
 

 
 

  

 

(877) 759-9991 

 

MON-FRI 7AM-4PM PST 

OR 

EMAIL:  [email protected] 

 

WEBSITE:  ReadyLIFT.COM 

 

**Please retain this document in your vehicle at all times.** 

IF your ReadyLIFT

®

 product has a damaged or missing 

part, please contact customer service directly and 

a new replacement part will be sent to you immediately. 

For warranty issues, please return to the place of  

installation and contact ReadyLIFT. 

Limited Lifetime Warranty 

 

This unique product warranty proves our commitment to the quality and reliability of every product that 

ReadyLIFT manufactures. The ReadyLIFT product warranty only extends to the original purchaser of 
any ReadyLIFT product, if it breaks, we will give you a new part. Warranty does not apply to discontin-

ued parts.  

 
Our Limited Lifetime Warranty excludes the following ReadyLIFT items; bushings, bump stops, ball 

joints, tie rod ends, heim joints and shock absorbers. These parts are subject to wear and are not con-

sidered defective when worn. They are warranted for 12 months from the date of purchase for defects 
in workmanship.  

 

This product warranty is voided if the vehicle is not aligned after kit installation and proper maintenance 
is routinely done.  

 

Product purchased directly from ReadyLIFT has a 90 day return policy on uninstalled products from the 
date of purchase (may be subject to restocking fee). Uninstalled product returns must be in the original 

ReadyLIFT packaging. Please call (877) 759-9991 to get an RGA# for any return. Customer is respon-

sible for shipping costs back to ReadyLIFT.  Returns without RGA# will be refused. Contact Ready-
LIFT directly about any potentially defective parts prior to removal from vehicle.  

 

ReadyLIFT products are NOT intended for off-road abuse. Any damage or failure as a result from off-
road abuse voids the warranty of the ReadyLIFT product. ReadyLIFT is NOT responsible for any subse-

69-2070 Ford Expedition 

Содержание 69-2070


















Отзывы: