Page
5
of
12
CLEANING INSTRUCTIONS:
CAUTION!
ALWAYS remove from charging base before cleaning or servicing. Failure to follow
this warning could
result in bodily injury.
Remove dust cup by depressing dust cup release button.
1) Empty dust cup contents into trash bin.
2) Remove and clean filter.
3) Replace filter and reattach dust cup.
FILTER
Keep Filters Clean.
The efficiency of this vacuum cleaner is largely dependent on the filter. A clogged filter can cause
overheating and possibly damage the vacuum cleaner.
Clean or replace filters regularly.
1) Slowly rinse the filter under running water, and allow to fully air dry for at
least 24 hours before replacing into vacuum.
NOTE:
Never machine wash or dry filter.
MAINTENANCE INSTRUCTIONS:
1) Inspect the charging base electrical cord and wiring for damage or discoloration. If there is damage do not use.
2) Inspect for loose fasteners.
3) Clean dust cup and filters in unit.
4) Listen for abnormal sounds.
5) DO NOT use a pressure washer, water hose, or other water source to clean the unit.
Debris Removal
1) Turn the vacuum OFF
– slide the switch backward
2) To remove debris from a clogged inlet, disconnect the dust cup.
3) Remove the obstruction and reattach the dust cup to the vacuum.
Servicing:
All servicing should be done by a qualified technician at an author-
ized service center. Use only original
manufacturer’s parts. To prevent electri-
cal shock: Always remove the electrical plug from the electrical outlet before per-
forming any repairs, maintenance or cleanup.
Save These Instructions
