Reading Stove Company Swatara CS-85, Руководство пользователя

Страница: 6 / 21

II. Installation Materials Needed for your Safety
BAROMETRIC DAMPER
Reading Stove Company recommends that a
barometric damper be installed in the chim-
ney connector pipe. Maintaining the draft at a
controlled constant minimizes the possibility of
over-firing and improves the combustion ef-
ficiency.
The Field Model R-C, manufactured by Field
Controls, Kinston, North Carolina 28501, is a
preferred version because it is easy to install
and does not require a draft gauge and tire for
set up.
The 6” Model R•C will fit in the side leg of a
standard single wall black tee connector. [See
Figure 5:1]
The tee may be positioned anywhere within
the stove to chimney connection. It may be
installed in either vertical, horizontal or sloping
smoke pipe. However, it is critical at, accurate
calibration that the front edge of the side leg is
straight up and down, i.e. perpendicular to the
floor. [See Figures 5:2 and 6:1.]
INSTALLATION MATERIALS
The Barometric Damper
Fig. 5:1 Field Model R-C Barometric Damper
Fig. 5:2 Draft Control Placement Examples
Divot
Pin
Locking
Screw