9
· The product has not been correctly maintained.
· The product has been tampered with.
· The product has been be exposed to violent or abrasive treatment.
Nonconformities due to age of the product (for example, discolouring of painting) are excluded from
warranty.In case of doubt regarding the existence of a defect or if an inspection is required, REAC
reserves the right to request the return of the product.
Any additional warranty obligations for parts replaced free of charge or for any service provided without
charge under this warranty shall be excluded.
Warranty of the replaced parts under warranty period will end on the date of expiry of the warranty period
of the product concerned.
.
6.3 Waste disposal
All REAC products are marked with this symbol. According to
Waste Electrical and Electronic
Equipment (WEEE) Directive 2002/96/CE,
the symbol indicates that the product must be taken
to a proper disposal site and cannot be discarded in normal household waste.
RPP10 consist of several parts with different material, which means it cannot be disposed as one single
item. It is recommended (at disposal) to disassemble and divide the product as much as possible into
feasible waste groups to be able to recycle the product in the most environmentally friendly way.
The following waste groups have been identified for the RPP10:
Cables
Electronics
Metal
Plastic
Batteries
RPP10
•
Internal harness
•
Connection cable
•
Connector circuit board
•
Charger circuit board
•
Screws
•
Cover
•
2 × 12 V Pb
Some of these main groups can be divided into sub-groups. Metal can, for example, be divided into iron,
stainless steel, and aluminum and alloy steel. Plastic can, for example, be divided into ABS, PA, PE, and
PP. All REAC plastic units are provided with an interior code for plastic types and fiber contents.
