background image

After Use

5 After Use

5.1 Recycling

The wheelchair can be divided into the following main
components:

Chassis

Plastic parts

Upholstery

Wheels, tires and tube

Packing

5.2 Waste disposal

Please be environmentally responsible and recycle this
product through your recycling facility at its end of life.

Waste disposal must comply with the laws and regulations
pertaining waste handling in each country.

Invacare® is continuously working towards ensuring that
the company’s impact on environment, locally and globally,
is reduced to a minimum. We only use REACH compliant
materials and components.

The wheelchair can be divided into the following main
components:

Chassis

The chassis is produced in steel and is fully recyclable.

Recycling of steel requires only 20-25% of the energy
compared to new produced steel.

The wheelchair has two gas pistons and they contain
oil and must be disposed according to national
requirements.

Be aware of that the gas pistons contains high
pressure and must be handled with care during
destruction.

Plastic parts

The plastic parts in the chairs are produced of
"Thermoplastic" and are marked with recycling symbols
(where it is possible due to part size).

The main plastic material is polyamide.

The plastic materials for the table are ABS and
polyamide.

This material can be recycled or burned in approved
facilities.

Upholstery

Upholstery is produced of polyester fibres (PUR) and
Dartex®.

The efficient way to recycle the parts is to burn them
in approved facilities.

Wheels, tires and tubes

The handrim, rim, spokes and hub are made of steel,
stainless steel or aluminium and can be recycled
according to above.

Tires and tubes are made of rubber and can be recycled
according to above.

Packing

All Invacare Rea AB packing material is developed to fit
the products in an optimal way to reduce unnecessary
material waste.

All boxes are recyclable.

End of life

At the end of this products life, it should be recycled
according to laws and regulations for waste handling in each
country.

Contact your local recycling agent to obtain the
correct information on how to handle the above
mentioned materials.

1580314-C

15

Содержание Clematis





















Отзывы: