REA Clematis, Руководство по обслуживанию

Страница: 10 / 20

Rea® Clematis®
3.4 Adjusting the brake effect
A
C
B
The distance A between the pin B and the tire C
should be max. 2 mm.
3.4.1 User brake — adjustment
To attain the correct braking effect, the brake pin should
press into the tire when you apply the brake. The brake may
therefore require depth adjustment.
WARNING!
Risk of reduced brake effect
– Incorrect setting or use of the brake reduces
the braking effect.
B
A
C
Tool: 5 mm Allen key
1. Loosen the screw A .
2. Move the brake to the required position.
3. Re-tighten the screw A .
CAUTION!
Risk of trapping fingers
– Be careful not to trap your fingers between the
brake pin B and rear wheel C .
3.4.2 Drum brake — adjustments
1.
A
Adjust the brake effect with the adjustment nut A on
the wire.
2.
B
B
When the desired brake effect is achieved, fixate the
brake wire with the fixation nut
B .
WARNING!
Risk of injury
Poor brake effect
– Check the brake effect after mounting or
adjusting the brake.
10 1580314-C