re3D Gigabot X, Руководство по началу работы

Страница: 21 / 30

IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
21
Insert the provided microSD card into the Viki
controller. Your Gigabot
®
X will come
pre-loaded with a gcode file. This file is
preconfigured for you to immediately print.
D1
On the Viki, push in the dial to access the
menus. Scroll to "Init. SD card" or "Change SD
card", and push in the dial to initialize the SD
card. Then navigate to "Print from SD", and
push in the dial.
D2
Select the .gcode file and Gigabot
®
X will begin
heating the bed and nozzles. Once heated,
Gigabot
®
X will begin to print. You can load
the SD card with your own gcode files to print
with later.
D3