Re Revision II Plus Touch, Инструкция по установке, использованию и техническому обслуживанию

Страница: 4 / 56

Re
S.p.A. ReVision II plus Touch
Rev.21/05/13 1/51
Warnings
The present manual is for device fitters and operators.
We recommend to read this manual carefully before the handling, installation, use, maintenance
and disassembly of the device.
This manual is an integral part of the device and must be kept until the device is decommissioned. It
reflects the technical state of the device at the time of its sale.
The plant builder may include the present manual in the documentation for plant use.
Re S.p.A. reserves the right to update its production and/or manuals without updating products already
sold and previous manuals.
This device is a partly completed machine that complies with directive 2006/42/CE. It is destined for
professional use in industrial settings; it is not able to carry out any process on its own but must be fitted
into a machinery.
It is the machine manufacturer’s responsibility to comply with the laws in force in the country the
machine is installed in and to adopt all the necessary safety measures.
We strongly recommend you to use the partly completed machine only for the purpose it has
been designed for.
Handling instructions
When handling take care not to knock the ReVision II plus Touch as this may damage it.
Safety notes
The ReVision II plus Touch viewing system must be fitted and used by qualified
technical personnel , in compliance with the safety norms required for the environment
the machine is installed in.
It is not suitable for work in open air areas, corrosive, explosive or excessively dusty
environments.
Don’t touch any voltage carrying parts.
Do not damage, tamper with or tread on the connection cables.
High voltages are present when the system is switched on, therefore all operations must
be performed when the
ReVision II plus Touch has been powered down. Make sure
that the power lead is disconnected.
Caution: due to the presence of capacitors in the video camera and DSP Touch,
high voltages may be present even when the system is switched off.
Components mounted on the electronic cards are sensitive to electrostatic discharges,
therefore take care when handling them and use the necessary precautions to avoid
damaging the devices.
Do not place food, drinks or other items on any part of the device. If the device comes into
direct contact with water (or other conductive liquids), disconnect the system and wait until
it is completely dry before connecting it again. If in doubt, contact our technical assistance
team or your local agent.
When handling the ReVision II plus Touch system always wear safety
gloves and boots and observe all the safety norms required for the
environment in which it is located.