Re Revision II Plus Touch, Инструкция по установке, использованию и техническому обслуживанию

Страница: 33 / 56

Re
S.p.A. ReVision II plus Touch
Rev. 21/05/13 30/51
Loading of images:
(to select which image to use for the comparison with the current sheet image)

pressing the load button in the Run mode (when there is an acquired frame on the screen),
displays the screen divided into 9 sections once again with the images previously memorized (in
the case of LD or CV systems, select the working program where the desired images are stored
by pressing the numbered icons at the bottom of the screen);

press one of the sections to select the image you desire to load (except for the last image in the
bottom right hand side);

once you have selected your image press exit ; in this way the image is loaded and is used to
compare with the current image;
Comparison of images:
Pressing the split button the viewing system acquires from the sheet the image in the same position of
the last loaded image, displaying it with the same zoom and iris parameters; (if no images has been
loaded, the last image memorized is considered).
The image acquired from the sheet is displayed on the screen compared with the previously loaded or
memorized image as shown below.
Pressing split once again divides the screen horizontally showing in the top part the image on the sheet
and in the bottom part the memorized image.
Pressing split once again divides the screen vertically, showing on the left hand side the memorized
image and on the right hand side the image acquired from the sheet.
Pressing split once again the memorized image disappears from the screen.
Memorized image
Image on belt
(continuously updated)
Split Load