ICENI/AI-04
3.3
Field Wiring Interface
As standard, Iceni modules are supplied with screw-clamp field wiring connectors,
although cage-clamp variants are available as an option.
For ICENI/AI-04 there are four connectors marked 1-4, 5-8, 9-12 and 13-16 to
match the numbers marked on the Iceni housing. This arrangement identifies the
connector to its location on the module.
When fitted properly, the field wiring connectors are held securely in the module
housing. In order to remove a terminal, a small flat bladed screwdriver should be
inserted between the top of the connector and the module housing to enable the
connector to be carefully levered free. This will release the connector without
damage.
Pub_3645
Page 9 of 25
