RDZ Unica 200, Техническое руководство по установке

Страница: 24 / 40

UNICA
Sanitary water heat pump
22
2. button
By pressing this button for 2” when the unit is in standby mode, the unit is turned ‘ON’ and runs on the setting mode. The
running mode, set temperature and water temperature, clock time and timer situation are displayed on the screen.
By pressing this button for 2” again when the unit is running, the unit is turned ‘OFF’ and enters into the standby mode.
3. and buttons
-
These are the multi-purpose buttons. They are used for temperature setting, parameter setting, parameter checking, clock
adjustment and adjustment of the timer.
-
During running status, press or button to adjust the setting temperature directly.
-
By pressing these buttons when the unit is on clock setting status, the hour(s) and the minute(s) of the clock time can be
adjusted.
-
By pressing these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of the timer ‘ON’/’OFF’ can
be adjusted.
-
Check and adjust the set parameters:
1) When the unit is ‘OFF’ or ‘ON’ (not on clock and timer setting status), short press button to entry the user
parameter checking. Select the parameter by pressing or button. Press to exit.
2) When the unit is ‘OFF’ (not on clock and timer setting status), press and buttons together for 2” and insert the
password confirming each field with button to entry the installer parameter setting. Select the parameter by
pressing or and short press button to access the parameter value. Press or button to adjust the value
and confirm with button. Press to exit.
For example: parameter 01, the relating value is 5°C:
Once the parameters have been set; the user cannot change the parameters optionally. Please ask a qualified
service person to do this when required.
-
By pressing and buttons at the same time and hold for 5 seconds, the buttons are locked.
-
By pressing and buttons at the same time and hold for 5 seconds again, the buttons are unlocked.