background image

10

For various reasons, mainly linked to the necessity to save energy, it is useful to be able to differentiate device operation into 

time bands.

The “time band” control is only relative to the LT Area system.

The device allows time band management, with the division of each day of the week into time periods (time bands) in which the 

LT system controller can vary, on the basis of the program performed, from Comfort to Economy operating mode or in Stand-by.

EVENTS

The “event” concept is introduced to identify the various time bands. 

For every event:

•  The starting time (in hours and minutes)

•  The operating mode that is activated (Comfort, Economy or Stand By

PROFILES

To distribute the various events per day of the week, the “profile” concept is introduced. 

For every profile:

•  The profile number (up to a maximum of 3 different profiles can be defined)

•  The distribution of the events within every profile, up to a maximum of 4 events for every profile

The profile to be associated can be specified for every day of the week. The default association will be “profile 1”.

Note: 

as the events available for every profile are HOWEVER 4, to disable an event (i.e. to reduce the number of time bands for 

a specific profile), it will be sufficient to give them the same start point and the same operating mode as the previous event.

PARAMETERS

To access the parameters modification described in the table below, follow the procedure given:

HOME

Mask

Description

U.M.

Min

Max

Note

Default

te00

Enabling of time band management

Num

On

Off

Off

WEEKL

PR

OGR

AMMING

te01

Profile selection, Monday

Num

1

3

1 = Profile 1

2 = Profile 2

3 = Profile 3

1

te02

Profile selection, Tuesday

Num

1

3

1

te03

Profile selection, Wednesday

Num

1

3

1

te04

Profile selection, Thursday

Num

1

3

1

te05

Profile selection, Friday

Num

1

3

1

te06

Profile selection, Saturday

Num

1

3

2

te07

Profile selection, Sunday

Num

1

3

2

3 TIME BAND MANAGEMENT

N.B. On Easy Clima Controller display TE01, TE02, ... TE07 screenshots are called MON, TUE, WED, THU, FRI, SAT, SUN

Содержание EASY CLIMA





















Отзывы: