MENU
FILE
COMMUNICATION
OPTIONS
WINDOW
HELP
NEW PROJECT Ctrl+N
OPEN PROJECT Ctrl+O
SAVE PROJECT Ctrl+S
SAVE AS...
PRINT Ctrl+P
CLOSE
EXIT Alt+F4
CONNECT Ctrl+Shift+C
DISCONNECT
SAVE THE SETTINGS
LANGUAGE
PRESETS
DATE BOARD
CASCADE
PROJECT’S NAME
ABOUT THE PROGRAM
ENGLISH
POLISH
PRESET’S NAME
PRESET COPY
ZERO SETTINGS
6. Menu s tructure of MWL Easy Manager program
MWL Easy Manager
11
7. DE-ESSER
De-Esser is a device that removes / reduces sibilance (wheezing, whistling and rustling).
This device can be used in two modes, namely mode "full range FULL" or "division band split".
The
FULL BAND
mode (FULL) function is to reduce the entire signal when thedisturbing sound comes tilting the rest
of the band. In SPLIT mode you have to set the de-esser with the potentiometer (9). Set using the potentiometer (9) the
lowest frequency from which to uptake of unwanted sounds (sibilants). The setting range is 800 Hz - 8 kHz.
Sibilants appear typically between 3 - 4 kHz. Use the Potentiometer (7) to set the value of the suppression of the
captured unwanted frequencies (sibilance) from 0dB to -20dB. The LED indicator (8) shows how much the unwanted
frequency is suppressed at the moment.
BAND FUNKTION
After pressing BAND the SPLIT mode is activated. If we set 3kHz the de-esser will damps
sibilance in the band of 3kHz to the upper threshold of 8kHz.
AIR FUNKTION
After pressing the AIR switch the higher frequencies will be protected.
Frequencies about 12kHz will be protected that the sound after “DE-ESSING” was still crystalline.
