SATSPEED-2 Interface / GPS-16 Receiver
KITS: K/SATSPEED2/W, K/SATSPEED2/C, K/SATSPEED2/S,
K/SATSPEED2/G, K/GPS16, K/GPS16/D9
User Instructions
Doc. No. S/DC/500-10-708 : Issue 5 - 8.10.13
Page 3
UK708500.DOC
Status LEDs
There are two LED’s indicating the unit’s status as follows,
PWR (Green)
GPS (Red)
Unit Status
Off
Off
No power
On
Off
Power but no GPS signal (No forward speed reading)
On
Flash*
Power + Standalone GPS (should result in forward speed reading)
On
On
Power + Differential GPS (optimal performance)
* Flashes @ VTG message frequency e.g. 4Hz
GPS 16
Description
The receiver is WAAS capable and is pre-configured for EGNOS - the European Geostationary Overlay System,
enabling sub-metre accuracy under ideal conditions. The receiver has a magnetic base. Mounting on a plastic
roof requires the metal base plate and self-adhesive pad included in the kit.
Specification
Physical:
Dimensions;
56mm (Diameter x 28mm (Height)
Weight:
87 g
Enclosure:
High impact, Corrosion-proof, Waterproof.
Cable length:
5m
Environmental:
Temperature:
Operating: -30°C to +75°C, Storage: -40°C to +85°C
Interface:
NMEA, RS232, GGA, VTG
Performance:
SBAS:
Supports WAAS, EGNOS
Start-up Time:
1.0sec typical (hot-start), 32.0sec typical (warm-start, cold start)
Accuracy:
Autonomous: <2.5m, WAAS,EGNOS: <2m, Velocity (VTG): +/- 0.1m/s
Update Rate:
4Hz
Power Supply:
10-13V )via RS232), 63 mA
Baud Rate:
19,200
