EC9000i Series Scanner User Guide
Setting up your scanner
Connecting the power cord
1. Align the flat side of the power connector so that it is facing up.
2. Insert the round end of the power cord into the power port on the back of the scanner.
When the cord is pushed in completely, it clicks into place.
3. With the power cord connected to the power adapter, plug the other end of cord into a power
outlet.
Disconnecting the power cord
Caution:
Disconnecting the scanner from a power source while the scanner is processing a transaction
might cause data loss.
The power cord has a sleeve on it that secures it to the unit. The security sleeve prevents the power cord
from being pulled out of the unit accidently.
1. Hold the unit in place with one hand to prevent the unit from falling.
2. With your other hand, slide the power cord security sleeve back and pull the power cord free of
the scanner.
Drivers and Applications
The drivers for your scanner are installed on your computer when you install the check scanning
application. There are many applications that support the RDM EC9000i scanner. Most are available from
third-party vendors.
If you are not sure where to acquire your check scanning application, check with whoever provided your
scanner.
©2014 RDM Corporation
Page 19
