6
Sales Offices -
International: (928) 443-9391 US: (800) 281-2683 Europe: (31) 20-6238-983
www.rdlnet.com
STATUS INPUT TERMINAL COMMANDS
ICE
n: (n = 1 to 8) Enables alert upon change in
STATUS INPUT
terminal. For
STATUS INPUT
terminal ‘n’
send a response from the CS1 to the computer for a change in status from active (grounded) to inactive
(open) and vice versa. The response is “ICnb” where n = user input terminal # and b = 0 for inactive and 1
for active.
ICEALL
: Enables input state change alerts on all 8
STATUS INPUT
s.
ICD
n: (n = 1 to 8) Disables input change alert, i.e. undo ICE command.
ICDALL
: Disables all ICE commands. No responses sent from CS1 for
STATUS INPUT
terminal changes.
I
n: (n = 1 to 8) Returns state of
STATUS INPUT
terminal ‘n’. The response is “Inb” where n =
STATUS
INPUT
terminal # and b = 0 for inactive and 1 for active.
IALL
: Returns state of all
STATUS INPUT
terminals. The response is “Ibbbbbbbb” where b = 0 for inactive
and 1 for active. The first character after “I” is
STATUS INPUT
#8, then #7, etc.
IA
bbbbbbbb: Returns alert for
STATUS INPUT
terminal pattern ‘bbbbbbbb’ where b=0 for inactive, 1 for
active and X for don’t care. The first character after “IA” is terminal #8, then #7, etc. The response is “IA”
when the user input terminals match the defined pattern. The alert response is sent even if the CS1 is in
“no response” mode which is the default mode or if an RDIS command was invoked. This command does
not affect any prior or future ICE or ICEALL commands.
CONTROL COMMANDS FOR MODEL SYS-CS1 TO CONTROL A SYSTEM 84
C1I
x
O
y: Turns on (ground) pin for input channel
I
x (x = 1 to 8) to output channel
O
y (y = 1 to 4).
C0I
x
O
y: Turns off (open) pin for input channel
I
x (x = 1 to 8) to output channel
O
y (y = 1 to 4).
CONTROL COMMANDS FOR MODEL RU2-CS1
ON
n: (n = 1 to 8) Turns output terminal ‘n’ on (grounded).
OALL
: Turns all output terminals on.
OFF
n: (n = 1 to 8) Turns output terminal ‘n’ off (open).
PUL
n: (n = 1 to 8) Pulses open-collector output terminal for 100 mS.
CONTROL COMMANDS FOR BOTH MODELS
OCLR
: Turns all output terminals off.
