SYMPTOM
REMEDIES
No camera picture 1. Check all connectors. Make sure camera (s) and monitor
are switched ON.
2. Ensure camera (s) and monitor are set to correct channel(s)
3. Make sure camera is within range of monitor (receiver).
Blank monitor 1. Make sure monitor is switched ON.
2. If using AC adapter, make sure it is plugged in.
3. Make sure rechargeable battery is charged.
Interference on 1. Make sure each camera (transmitter) is within range, and
camera picture that no large obstructions are blocking the signal.
2. Try repositioning the camera, monitor or both to improve
the reception quality.
3. Reposition other nearby equipment transmitting on
2.4 GHz frequency.
Audio problems 1. Ensure the volume is turned up sufficiently on the monitor.
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try
moving the camera away from the monitor or angle the
monitor differently.
Specifications ///
Camera (Transmitter)
TV System NTSC or PAL standard
Integrated Lens 5.6mm, fixed focus
Resolution 360 horizontal TV lines
Signal/Noise Ratio 48dB
Image Sensor 1/3
”
CMOS
Min. Illumination 0.1 lux
Current Consumption 150 mA
Frequency Range 2.41~2.47 GHz
Modulation FM
Channel Selection Electronic tuning with PLL
Overall Size 2.0"W*3.2"H*3.1"D
Monitor (Receiver)
Frequency Range 2.41~2.47 GHz
Current Consumption 350 mA
Channel Selection Electronic tuning with PLL
Signal/Noise Ratio 38dB
Battery (for Monitor)
Voltage 7.4V
