
3. Remotely adding the remote to the receiver's memory.
The function of remote adding the remote allows you to add a remote control without having physical
access to the receiver. The condition for success is the necessity to be within the radio range of the receiver
and to have a previously added remote control.
The function is available only for RDA remotes.
To remotely add a remote control, press the button of the already added remote for 15 seconds within the
receiver's range. Then, within no more than 3 seconds, press and hold down the button of the remote
control to be added for 15 seconds.
The remote adding feature is not available when:
•
configure the channel to work in momentary mode,
•
enabled blockade of remote adding remotes,
•
using remote controls from other manufacturers in the procedure,
•
service-lock is enabled.
Unsuccessful adding of the remote control may be caused by:
•
low battery of any of the remote controls,
•
radio interference that may have occurred during the procedure,
•
memory of the receiver is full (attempt to enter 201 remote control).
1
2
3
PRESS AND HOLD FOR
15 SECONDS BUTTON
OF "OLD" REMOTE
AFTER MAX 3 SECONDS
PRESS AND HOLD FOR
15 SECONDS BUTTON
OF "NEW" REMOTE
REMOTE IN RECEIVER
RADIO RANGE
REMOTE IN RECEIVER
RADIO RANGE
Fig.4
Remotely adding the remote control.
EN
EN