
SCHOOL-CUBE 500
14
2. Drücken Sie SD/USB/CD oder SD/USB/CD auf der Fern-
bedienung. Wählen Sie USB und drücken PLAY/PAU-
SE oder
12
auf der Fernbedienung um die Musik ab zu
spielen.
Wenn Sie andere Abspielmöglichkeiten auswählen möch-
ten, fahren Sie gemäß vorhergehender Beschreibung und
den Funktionen auf der Fernbedienung fort.
SD-Card:
1. Stecken Sie die Speicherkarte in den dafür vorgese-
henen Schacht im Frontfeld.
Ziehen Sie an der Karte um sie mit dem Zapfen zu ver-
ankern. Wenn Sie die Karte auswerfen möchten, drücken
Sie gegen die Karte in Richtung Gerät, das verursacht ein
auswerfen.
Bitte versuchen Sie nicht, die Karte gewaltsam aus dem
Schacht zu ziehen, das könnte Schaden am Gerät und
der Karte verursachen.
2. Drücken Sie SD/USB/CD oder SD/USB/CD auf der Fern-
bedienung. Wählen Sie SD und drücken PLAY/PAUSE
oder
12
auf der Fernbedienung um die Musik ab zu
spielen.
Wenn Sie andere Abspielmöglichkeiten auswählen möch-
ten, fahren Sie gemäß vorhergehender Beschreibung und
den Funktionen auf der Fernbedienung fort.
BT:
1. Aktivieren Sie den BT-Modus an ihrem BT fähigem Wie-
dergabegerät (z.B. Smartphone).
2. Betätigen Sie anschließend mehrmals an Ihrem School-
Cube die MODE-Taste bis „BT-Mode“ am Display er-
scheint.
3. Die Audiowiedergabe ihres Blootooth-Endgerätes kann
jetzt auf dem School-Cube übertragen werden.
2. Press SD / USB / CD or SD / USB / CD on the remote
controller. Selects USB then press PLAY / PAUSE or
12
on the remote controller to playing.
As for other playing operation way, pease refer to the
operation way in playing and the functions respectively
on the remote controller.
SD-Card:
1. Insert SD Card or MMC Card into the insert hole of SD/
MMC Card in the face plate. Pull the card to get stuck
with the tenon. It then finished the assembly. When ta-
king out the card, please push the card to the bottom and
then release to shout it out.
Please don‘t use the force to pull it out. If so, it will dama-
ge the card and the machine.
2. Press SD/USB/CD or SD/USB/CD on the remote control-
ler. Selects SD then press PLAY / PAUSE or
12
on the
remote controller to playing.
As for other playing operation way, pease refer to the
operation way in playing and the functions respectively
on the remote controller.
BT:
1. Activate the BT mode on your BT enabled playback de-
vice (eg smartphone).
2. Then press the MODE button repeatedly until „BT-Mode“
appears at your school Cube on the display.
3. Audio playback of your Blootooth device can now be
transmitted to the School-Cube.