RCS bb-bk1810., Руководство пользователя

Страница: 33 / 72

Fehler! Formatvorlage nicht definiert.
xxxiii
This chapter provides information on how to reinstall the software on the hard disk in
case of disk failure.
Installing the Windows 98 Operating System
You will be using the Windows 98 CD disk that came with your system to install the
operating system. For detailed information on how to install the operating system, refer to
chapter 2 of the
Windows 98 Getting Started manual, which is bundled with the
Windows 98 CD.
Note : Before you start installing the Windows operating system to your Book PC’s
hard disk drive, make sure that you have access to the CD-ROM/DVD drive. If
necessary, install the proper CD-ROM/DVD driver first. You can find the necessary
files on the support CD.
Installing the Bundled Software
The support CD shipped with your system contains an original copy of all the software
that was preinstalled on the hard disk drive, including all the drivers and the application
software. You can use it to restore the Book PC’s hard disk to its original form.
Before you proceed to install any of the bundled software, make sure to have installed the
Windows 98 operating system first.
Table of contents of the support CD
Note : The correct path name for each software driver is provided, where D:
identifies the CD-ROM drive letter – modify if necessary.
Bus Master IDE Driver
The IDE Bus Master Driver allows the system to properly manage the IDE
channels on the mainboard of your Book PC. You need to install two IDE
drivers if you are using Windows 95/98.
§
Windows 9x –
D:\IDE\BKI810\WIN9x\Intelinf\SETUP.EXE and then
D:\IDE\BKI810\WIN9x\Infinst\SETUP.EXE
USB Driver
The USB Driver allows the system to recognize the USB ports on the mainboard. You
need to install this driver if you are running Windows 95.