Rcom PRO 50, Руководство пользователя, Страница: 18 / 28

MANUAL
SHIFT
Humidification Function ON/ OFF Setting
Egg Turning Test
Incubation Condition Reset during Incubation
▶ You should turn OFF humidification function when you operate incubator without water,
or when you want to incubate with low humidity below 30%.
▶ Press MANUAL button 4 times and then press DOWN button continuously until OFF indication is showing.
Then, press ENTER button to turn humidification off.
If you want to humidification turn ON, set humidity over 30%
4Times 5Times
[Humidification ON] [Humidification OFF]
▶ Press ENTER button for about 5sec. during incubation
period to check egg turning.
▶ If egg turning does not work, check whether you assembled
the egg turning plate properly.
[Refer to the page 10.]
▶ This is used when you want to change incubation
setting mode again during incubation.
Press MANUAL button during incubation, then
Temp. display will blink.
If you want to change Temp. reset with UP/DOWN button
and then press ENTER to save.
Using this method, you can also reset humidity, egg turning
angle, and egg turning interval. If you do not want to change
setting, just press MANUAL button then it passed to next stage.
Also, it returns to incubation screen if you do not press
any key for about 10sec.
▶ You can go directly to the needed setting mode by
pressing MANUAL button several times according to your needs.
It can be used when you want to check the current incubation
condition during incubation.
▶ If you press ENTER button, LCD display indicates
setting Temp. & Humidity.
Sdudphwhu#vdyhg
[Setting Save Message]
Fklfnhq
##93
<3#䯍
Fklfnhq
##93
<3#䯍
0''
) V N J E J U Z
0''
%BZT
Sdudphwhu#vdyhg
ENTER
%*(*5"-*/$6#"503
4;
(6) Incubation conditions reset /
How to Set Egg Turning Test /
Turn ON, OFF Humidification Function
3. Function Settings
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Egg Incubator Hatcher Rcom USB and Pro 50 User Manual