▶
There is no separate power switch on this product. The equipment turns off when the power cord is unplugged.
▶
To start using again, simply re-connect the power.
▶
You can operate the equipment on minimal consumption power if you turn off the temperature function and
humidity function.
How to Terminate Brooding
Power Cord
HOLD
▶
In case of large temperature difference between equipment interior and installation environment, water can
leak onto the window, tray or the floor. This is a natural phenomenon and may happen more severly under more
humid conditions. To minimize condensation effects, the equipment must be installed in a place where the
temperature difference between equipment interior and installation environment is small.
▶
If the equipment is turned off in the middle of operation, humidity remaining inside the equipment may cause
water drops (dew) to stick on to the surface. To prevent this, the equipment should be turned off after the internal
humidity is eliminated by emptying the humidifying water container and running the equipment for about one
hour before turning it off.
▶
If not using the equipment for a long period of time, open the window on equipment and dry the interior of the
equipment for about a day in a well-ventilated place.
※
The electronic areas of the equipment are treated with special coatings against humidity.
DIGITAL INCUBATOR
11
Dew Condensation
▶
If you unplug the power cord and re-plug while the SET
button is pushed, “rSt” will appear on the display unit and
the equipment will be initialized to a setting when it was
first released from the factory.
▶
Used to initialize equipment to a setting when it was first
released from the factory in case where the input value
is changed due to mal-operation of equipment.
Return to Factory Setting
2. Brooding
3. Function Settings
(3) How to Terminate Brooding
(4)Dew Condensation
(1) Return to Factory Setting
North America Sales & Service www.RcomCo.com
Rcom Reptile Brooder User Manual
