7
8
The Eutrac 3-Circuit track adaptor is compatible with
a number of different 3-Circuit track systems
including Eutrac, Erco & iGuzzini systems. For further
options, please contact RCL.
NOTES
With the 3-Circuit track adaptor, you can choose
which circuit the luminaire is connected to:
Unconnected - The luminaire is not connected to any
circuit.
Circuit 1 - From the unconnected position, rotate the
knob clockwise 90°.
Circuit 2 - From the unconnected position, rotate the
knob anticlockwise 90°.
When installing multiple fixtures, always allow a
minimum of 250mm between luminaires.
250mm MIN.
Circuit 3 - From the unconnected position pull knob
down then rotate anticlockwise 90° .
PAGE 2
1
Ensure that the track system where the DR8 luminaire
is to be installed is compatible with the Eutrac
2-Circuit adaptor.
B
2-Circuit Track Installation
If the spotlight is to be controlled via DMX or DALI,
ensure that track system includes Data Bus. See For
more information on DMX Installation see DOC-083.
NOTES
2
1
N
*note orientation
PAGE 3
2
To mount the track adaptor into the track system, first
check that both the selector knob and the adaptor
lock are disengaged, as shown below.
3
4
5
6
Insert the track adaptor into track system. Take care
to avoid any fixing screws holding the track onto the
ceiling.
Rotate selector knob to the desired circuit position
(see section 7).
Rotate adaptor lock clockwise 90° to connect the
adaptor to the neutral circuit.
When installing the adaptor into the track, ensure that
it is orientated correctly. Align the tabs with the
slot on the track.
7
The Eutrac 2-Circuit track adaptor is compatible with
a number of different 2-Circuit track systems
including Eutrac, Erco & iGuzzini systems. For further
options, please contact RCL.
NOTES
With the 2-Circuit track adaptor, you can choose
which circuit the luminaire is connected to:
Unconnected - The luminaire is not connected to any
circuit.
Circuit 1 - From the unconnected position, rotate the
knob clockwise 90°.
Circuit 2 - From the unconnected position, rotate the
knob anticlockwise 90°.