RCI RPTZ1080-18X+CTP18AH108, Руководство пользователя

Страница: 41 / 55

HD IR AHD Intelligent High Speed Dome User Manual
40
5.1 Wiring (Do not connect to power)
(Please refer to 3.2.3)
5.2 Protocol and Baud Rate Setting (Do not set when dome is connected to power; dome should be restarted if
there is any change in the setting)
(Please refer to 3.3.1)
The Dip Switch is on PCB Board inside the dome.
5.3 Dome Address Setting (Do not set when dome is connected to power; dome should be restarted if there is any
change in the setting.)
In left picture: Dome address is:1
(Please refer to 3.3.2)
The Dip Switch is on PCB Board inside the dome.
5.4 Connect to Power.
Now user can see self-checking of both dome (rotation) and board camera (you can see image on monitor).
5.5 Controller Setting
For the controller, the protocol, baud rate and address should be the same as the dome (please
manual of controller for the detailed setting)
Precaution: If the protocol of dome is “Auto”, then protocol of controller can be PELCO
ULTRACK, VICON, etc, but baud rate and address should be the same as dome, otherwise the dome can’t be
controlled.
5.6 Testing
Now user can start testing the dome if all the above is done.
1. Pan/Tilt Move Testing
Dome Address Setting
dome is connected to power; dome should be restarted if
arted if there is any
Dome address is:1
(you can see image on monitor).
(please refer to the user
Precaution: If the protocol of dome is “Auto”, then protocol of controller can be PELCO-D, PELCO-P,
ULTRACK, VICON, etc, but baud rate and address should be the same as dome, otherwise the dome can’t be