3
Fail Locked F2164 (Fire-Rated) & Fail Unlocked 2364 Installation Instructions (Continued)
Adjust Plug-in Latch Monitor (Accessory):
First, move the door towards the strike so that the latch
touches the keeper.
Mark latch limit lines on keeper.
Then, open the door. Mount the Latch Monitor on
the strike housing so that it is between the latch limit
lines marked on keeper.
2. Mark strike position on the frame.
3. Peel the adhesive backing from tape on the back side of
the appropriate faceplate. Remove the strike mounting
screws. Hold the strike in position as marked on frame.
Carefully position the faceplate onto the strike and secure
to the frame
.
© 2016 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
