6.18 PROGRAMMING
RECAPITULATION
In
PRG
(4 + KEY) press
[%+]
until
Setting Summary
is displayed. Press
[KONTANT] to get the printout of the programming done.
6.19 PLU
RECAPITULATION
In
PRG
(4 + KEY) press
[%+]
until
PLU Summary
is displayed. Press
[KONTANT] to get the printout of all programmed PLU.
6.20 SERIAL PORT PROGRAMMING
In
PRG
(4 + KEY) press
[%+]
until
PC PORT
is displayed. Such
programming allows choosing which device is connected to the port .
Press [KONTANT] to start the programming:
A) Slide the keys [%+] and [%-] to
alternatively display
•
COM2 @ 9600
•
COM1 @ 57600bps
•
COM1 @ 9600bps
Then press KONTANT.
Once left the PRG “
PC PORT”
function, press the key [VOID] to go back
to PRG function, or continue the programming.
NOTES Remember to set COM2 @ 9600 configuration before tickets
registration. When you power ON the Ecr, COM2 @ 9600 configuration is
set.
- PC PORT -
COM2 @ 9600 DEF
38
7. RECORDING (REG)
In the following chapter there are illustrated a series of instructions and
most common examples to issue the fiscal receipt.
To perform such operations it is required to position in REG “recording”
through 1 + KEY
7.1 CLERK’S SETTINGS
Before starting the recording of the items, if required set up the clerk,
acting as follows: press the key [CLERK], and the display shows
Enter the clerk number (1 - 4) and press again the key [CLERK].
The display returns in REG showing a reference of the clerk set up.
Example for clerk 2.
CLERK CODE ?
1
REG (CL2)
0,00
