RCF XPS 16K Скачать руководство пользователя страница 22

Страница: 22 / 56

CONTROL

XPS 16K features 4 Gigabit Ethernet network ports,
managed by a high-performance switch compliant with
IEEE802.1 AVB standard.

Any of the LAN port can be used as in/out.

It is strongly recommended to reserve a specific
VLAN to the control communication, in order to
guarantee connection performance and integrity.

Led 1

GREEN – flashing - link/activity

Led 2

YELLOW (LAN 1 and LAN 2) – GREEN (LAN 3
and LAN 4) – steady – device connected to a
gigabit network.

DAISY CHAIN TOPOLOGY

Thanks to the internal switch, XPS 16K can be directly
connected to an ethernet network, and a daisy chain
topology can be built.

The maximum number of devices that can be connected
in daisy-chain depends on the specific user needs in
terms of latency, that necessary increases with the
number of units.

It is good practice not to connect more than 8 units in
daisy chain.

Содержание XPS 16K

























































Результаты поиска

Содержание XPS 16K

Отзывы:

Бренды по названию

Популярные бренды

RCF XPS 16K, Руководство пользователя

Результаты поиска

Содержание XPS 16K

Отзывы:

Бренды по названию

Популярные бренды