12
ENGLISH
REMOTE CONTROL TOUCH SCREEN: HOME PAGE
The page number is indicated in the top left-hand corner (P1: page 1). The battery charge
is indicated in the top right-hand corner (it flashes when batteries need to be replaced).
EASYBEAM, EASYFOCUS, FREEBEAM:
setting modes (see the next manual section).
AUDIOSET:
volume and equalisation settings.
PHASE:
signal phase setting.
DELAY:
delay line settings.
INPUT:
audio input selection.
KEY (symbol):
setting mode lock.
SETTING MODES
The loudspeaker preset can be chosen in three different setting modes:
-
“EASY FOCUS”
, simple, easy and suitable for all systems, advisable for users and
installers that are not so expert (only two values are necessary: the loudspeaker
installation height and the max. distance to be covered).
-
“EASY BEAM”
, intermediate level that allows users / installers to specify the listening
area to be covered (by selecting a preset).
-
“FREE BEAM”
, advanced level (for expert users / installers) that allows the (virtual)
setting of both loudspeaker tilt and beam.
i
n
case
of
doubT
abouT
The
choice
of
The
seTTing
mode
,
sTarT
from
The
simplesT
one
:
‘easy focus’ !
EASY FOCUS
This setting mode permits to cover the listening area uniformly from the loudspeaker to
its focus, minimising the sound pressure level beyond that point and reducing the reflec-
tions outside the listening area (that is good for reverberant halls).
Only two values are necessary: the loudspeaker installation height
H
(considering the
loudspeaker bottom) and the maximum distance to be covered
F
.
H:
loudspeaker bottom installation height
(1.5 – 2.0 – 2.5 – 3.0 m)
F:
maximum distance to be covered
(10 – 15 – 20 – 30 m)
ha:
considered listening area height (1.2 m)
In the home page, select
EASY FOCUS
to enter the preset pages.
H
ha
F
EASYBEAM
FREEBEAM
PHASE
INPUT
EASYFOCUS
AUDIOSET
DELAY
RCF PROFESSIONAL
VSA
P1
EASYBEAM
FREEBEAM
PHASE
INPUT
EASYFOCUS
AUDIOSET
DELAY
RCF PROFESSIONAL
VSA
P1
REMOTE CONTROL TOUCH
SCREEN: HOME PAGE
SETTING MODES
EASY FOCUS